Heating & Air Conditioning Services, Oceanside, CA. N. San Diego Area


Call Today (760) 908-5076

Oceanside, CA 92057

Mon-Fri: 8:00am – 5:00pm

Hours Of Operation

CA Contractor’s License No


Furnace Keeps Tripping Circuit Breaker

Furnace installs & Services Oceanside CA & San Diego Area

Furnace installs & Services Oceanside CA & San Diego Area

Efficient performance of your heating system during the winter season is a must.

Turning on your heating system, as the furnace of the system starts to work, the circuit breaker in the home trips down.

Circuit breakers are essential; they protect the home from possible electrical damages or even a fire. But this does not mean people won’t feel annoyed when this happens again and again.

Most people do not know why the breaker keeps on tripping as the furnace kicks on. So rather than applying any DIY techniques, it is always best to call the experts that deal in furnace repair, or new furnace installs in Oceanside, CA and San Diego Area. Call Today (760) 908-5076

Circuit Breaker Tripping When Using Furnace?

When the breaker trips each time the furnace of the installed heating system starts to work or most of the time, it may be indicating some internal functional problem which can complicate things with continuous use of the system without repair.

The two possible causes that result in such situations are an overloaded circuit or a short circuit.

Overloaded Circuit

Electrical circuit becomes overloaded when the current in the dedicated circuit of the heating system is beyond the safe limit. When the current goes above the threshold, the circuit breaker will trip.

One reason why the breaker trips when the furnace has turned on could be a dirty air filter or lack of timely maintenance of the heating system installed in your home.

Short Circuit

In electrical terms, something must have gone wrong that results in a short circuit. When a wire or when an electrical component(s) comes in contact with something it should not, the result is a short circuit. If this happens because of the furnace, this means that something is touching something it should not be

Other Possible Causes of Breaker Tripping with the use of Furnace

Other than the heating system, the problem may lie in the electrical panel installed in your home, and not with the furnace at all. With time, even the installed electrical panels need repair or replacement.

Similarly, the problem may lie with the breaker itself, which needs to be repaired or replaced as per the electrical requirements of your home.

Call Today (760) 908-5076 – www.AirTimeHeatingandAirPro.com

Things to Keep in Mind When Your Furnace Keeps on Tripping The Fuse

Since most people do not know what to do when such a situation arises. Here are a few things you should keep in mind when the fuse trips down with the use of the installed heating system:

Avoid flipping the breaker back on, again and again, just hoping that it will work fine the next time. You should know that the installed breaker is doing its part to protect you by tripping down.

Do not delay calling the professionals that offer services of heating system repair or new furnace installs in Oceanside, CA. The earlier you get the required services done, the better it will be for you. It is always better not to allow an electrical problem to sit in your home.

Such problems may also arise if you have not opted for the timely repair and maintenance of the installed heating system.

Call Today (760) 908-5076 – www.AirTimeHeatingandAirPro.com

Comments are closed.